Jining Hongtu Machinery Manufacturing Co., Ltd. is a mining company Research and production of mining excavation loaders, slag collectors, track type industrial and mining electric locomotives, rectifier cabinets, and other products for tunnel engineering sale. A service-oriented enterprise. Covering an area of 15000 square meters, it has 13000 square meters of factory buildings and warehouses. The factory is located in Qufu, the hometown of Confucius.
The company strives for high-quality products and utilizes knowledge Technology Experience creates valuable satisfaction for consumers. We win with excellence and bring development to the enterprise.
Electric locomotive is a type of traction equipment used in the transportation of rail vehicles. Its power comes from the use of traction motors to drive the wheels to rotate, and the friction between the wheels and the track surface is utilized to make the locomotive run on the track. This operating mode is not only limited by the power of the traction motor (or internal combustion engine), but also by the friction between the wheels and the rail surface. The slope that locomotives can travel on is limited, and the slope of the transport track is generally 3 ‰, with local slopes not exceeding 30 ‰. It is classified by structure into overhead electric locomotives and battery electric locomotives.
The function of battery electric locomotives is to transport the ore (waste rock) discharged from the mining funnel, mining yard or chute through transportation tunnels to underground ore storage warehouses, underground (or middle) yards, or directly out of the mine through the adit entrance. The materials, equipment, personnel, etc. at the underground (or middle) yards are transported to the work site. The main task of open-pit mine locomotive transportation is to transport the ore from the mining yard to the beneficiation yard and the waste rock to the waste disposal yard.
| 2.5 tonsMining transport electric locomotive |
| Track gauge(mm)) |
600/762 /900 |
| Wheelbase(mm) |
650 |
| Minimum curve radius |
5m |
Rolling diameter of wheels
|
430 460mm |
| size |
2360*914*1550mm |
| weight |
2.5tons |
| maximum traction force |
2.75KN |
| Hourly tractive force |
6.13KN |
| Small hourly rate |
4.54Km/h |
| voltage |
48 |
| Motor Power |
3.5*1KW 4*1kw |
| Towing height |
210 320mm |
| Braking mode |
Hydraulic Brake Mechanical braking |
| Speed Control |
Resistance speed regulation, chopper speed regulat |
| Gear Ratio |
18.4 17.9 |
| Height from the track surface to the top of the driver's cab |
1550mm |
| Minimum curve radius |
5m |
Audited Supplier 
){kind=link}